User's Manual

16.Specifications
16.1WirelessSpecifications
• Line of sight wireless transmission (in open air): 100m.
• Frequency: 433 MHz
• Update Rate: 60 seconds for rain sensor and thermo-hygrometer sensor, 16s for wind sensor.
16.2MeasurementSpecifications
The following table provides specifications for the measured parameters.
Measurement Range Accuracy Resolution
Indoor Temperature 0 to 60 °C ± 1 °C 0.1 °C
Outdoor Temperature -40 to 60 °C ± 1 °C 0.1 °C
Indoor Humidity 10 to 99 % ± 5% (only guaranteed
between 20 to 90%)
1 %
Outdoor Humidity 10 to 99% ± 5% (only guaranteed
between 20 to 90%)
1 %
Rain 0 to 9999mm <15mm: ±1 mm,
15mm to 9999mm: ±7%
<1000mm (0.3mm)
>1000mm (1mm)
Wind Direction 0 - 360 º 45º (8 point compass) 45º (8 point compass)
Wind Speed 0 to 50 m/s 2 m/s ~10 m/s: ±3m/s,
10m/s ~50 m/s: ±10%
(whichever is greater)
0.1 m/s
Barometric Pressure: 300 to 1100 hpa ± 3 hpa 0.1 hpa
16.3PowerConsumption
• Base station (display console) : 4 x AAA 1.5V Alkaline or Lithium batteries (not included)
• Display Adaptor: DC 5V, 1.0A 100-240V 50 / 60 Hz UL
• Thermo-hygro Sensor : 2 x AAA alkaline batteries or Lithium batteries (not included)
• Rain sensor: 4xAAA alkaline batteries or Lithium batteries (not included)
• Wind sensor: 4xAAA alkaline batteries or Lithium batteries (not included)
• Battery life: Minimum 12 months for base station with excellent reception. Intermittent reception and
multiple sensors may reduce the battery life.
Minimum 12 months for sensors (use lithium batteries in cold weather climates less than -20 °C)
16.4WiFiSpecifications 
1. WIFI Standard: 802.11 b/g/n
2. WiFi Console RF Frequency: 2.4 GHz
3. Setup User Interface (UI) support setup device: Build-in WiFi with WAP mode smart device, including
laptops, computers, smart phones and smart pads.
4. Recommend web browser for setup UI: Web browser support of HTML 5, such as the latest versions of