User's Manual

seconds in normal mode, the console icon(in front of the indoor temperature) will flash to signify that
it has entered WAP (wireless access point) mode, and is ready to enter for WIFI settings.
15.1.2. Use your smart phone, tablet, or computer to connect to the console through WiFi(reference: Example
1-4 of WiFi Setting ).
15.1.3.Once connected, enter the following IP address into any browser’s address bar:
http://192.168.5.1/upgrade.html
Figure 38
15.1.4.Connection success, it will jump to “Upload Setting” screen automatically.
Figure 39
15.1.5.Update WeatherHome.bin contains you saved file when press Select File key
Figure 40
15.1.6. If update successfully when press Upgrade key. Then you will see.