User's Manual

Once the signal is reacquired, the remote search icon will turn off, and the current values will be
displayed.
3. If new sensors are added, subtracted, or multiple sensor channels are lost, in search mode to select ALL
and press SET or Alarm key to exit, and the remote search icon
will be constantly displayed for
up to 3minutes. Once the signal is reacquired, the remote search icon
will turn off, and the current
values will be displayed.
4. Select NOT and press SET or Alarm key to exit, then return to normal mode.
8.5ResetMin/Maxrecord
In normal mode, Press the MIN/MAX/- button to switch, week zone of display that flashing max
record maximum record humidity and temperature , pressure ,wind speed and rain fallon LCD, then press SET
button to clear the max value return the current value (all data);
Then press the MIN/MAX/- key again, week zone of display that flashing min record humidity and
temperature and pressure on LCD, click SET button to clear the min value return the current value (all data);
If you press the MIN/MAX/- key in the MIN /MAX jump display, in this mode if you press light/snooze key to
exit the MIN/MAX checking and cleaning mode, return to normal display.
If have rainfall data, when display MIN data mode it---, MAX for 1H/24H/WEEK/MONTH of the largest
recorded data, the current time is shown when the maximum value, if the current is TOTAL data show that MAX
should jump to the largest recorded data 1H, because TOTAL is not the largest recorded.
If use “clear daily” mode, all data will be a day when the 0:00 time automatic clearance.
8.5.1RestoreFactoryDefault
To restore the console to factory default(WiFi netword ,Weather server and display), press the MIN/MAX/- key
while installing the batteries at the same time. Wait 3 seconds after installing the batteries to let go of the
MIN/MAX /- key.
8.6SnoozeMode
When the alarm sounds and alarm icon flashes, touch the SNOOZE/LIGHT key to temporarily silence the
alarm for five minutes.
The snooze icon
will continue to flash , after five minutes, the alarm will sound again. This will continue
until the alarm is turned off. Touch any key (SET, Min/Max/-,CHANNEL/+) to permanently exit the Snooze
mode.