User's Manual
ALARM and CHANNEL/+, key.
8.1QuickDisplayMode
Note: To exit the Quick Display Mode at any time, press the SNOOZE/LIGHT button on the top of the
display console.
While in the Normal mode, press the SET key once to enter the Quick Set Mode. The Quick Set mode can
be exited at any time by waiting for the 10-seconds time-out to take effect. You can skip over any setting by
pressing the SET key again.
1. Time/second, Time/week and date/year display.Press the SET key the time will begin flashing. Now
press the CHANNEL/+ or MIN/MAX /-(WIFI) key to alternate the display between Time/second,
Time/week and date/year.
2. Rain display.Press SET key again enter the rain mode.If press SET key the Rain display will begin
flashing, Press the CHANNEL/+ or MIN/MAX /-(WIFI) key to alternate the display between
1H,24H,WEEK MONTH,TOTAL ,Press SET key again enter the barometer mode.Press the LIGHT key to
exit setting mode.
3. Relative and Absolute Pressure Display.The pressure will begin flashing. Press the CHANNEL/+ or
MIN/MAX /-(WIFI) key to alternate the display between absolute and relative pressure. Press SET key to
enter the graph mode.
4. Outdoor temperature ,Dew point and Feels like.Press the SET key to the outdoor TEMP flashing.
Press the CHANNEL/+ or MIN/MAX /-(WIFI) key to alternate for the temperature ,Dew point and Feels
like.Press the SET key to exit setting mode
8.2Set(Program)Mode
While in Normal Mode, press and hold the SET key for at least three seconds to enter the Set Mode. The first
setting will begin flashing. You can press the SET key again to skip any step, as defined below.
Note: In the Set mode, press the [+] key or [-] key to change or scroll the value. Hold the [+] key or [-] key
for three seconds to increase/decrease rapidly.
Note: To exit the Set mode at any time, press the SNOOZE/LIGHT button on the top of the display
console.
1. 12/24 Hour Format (default: 24h):. Press the SET key again to adjust the 12/24 hour format setting (FMT).
Press the [+] key or [-] key to change between 12 hour and 24 hour format.
2. Change Hour. Press the SET key again to set the hour. Press the [+] key or [-] key to adjust the hour up or
down.
3. Change Minute. Press the SET key again to set the minute. Press the [+] key or [-] key to adjust the minute
up or down.
4. Date Format (default: DD-MM): Press the SET key again to enter the day/month format mode. Press the
[+] key to switch between M-D, D-M.