User's Manual

3.Thermo-hygrometer Transmitter installation. It is recommended you mount the Thermo-hygrometer
sensor outside in a shaded area. A north facing wall is preferred because it is in the shade most of the day. Direct
sunlight and radiant heat sources will result in inaccurate temperature readings. Although the sensor is water
resistant, it is best to mount in a well protected area, such as under an eve. Use a screw or nail (not included) to
affix the remote sensor to the wall, as shown in Figure 19.
Figure 19
7LowBatteryIcon
A low battery indicator icon is shown in the display window for thermo-hygrometer sensor. When the low battery
icon appears (the battery voltage is lower than 2.4V), replace the batteries in the sensor with fresh batteries. Be
sure to never mix old and new batteries, and never mix battery types such as alkaline and lithium together.
8ConsoleOperation
Note: The console has five keys for easy operation: MIN/MAX /-(WIFI), SET, LIGHT/SNOOZE,
Figure 18