User's Manual
6. FinalInstallationofSensors
1. Wind transmitter installation. Prior to installation, you will need to calibrate the wind direction. There is
a “S” indicator on the wind vane that indicates South, as shown in Figure 14. Align this “S” marker in the direction
of South.
Fasten the wind transmitter to mounting pole brackets with foot-mounting, two ￠3 bolts and M3 nuts , as shown
in Figure 15.
Tighten the mounting pole to your mounting pole (purchased separately) with the four￠5 Bolts and M5 Nuts
assembly, or fix on the wall with four tapping screw, as shown in Figure 16.
Figure 14
Figure 15