User's Manual

5
Note: We recommend installing Lithium AA batteries for sensors.
The sensor LED indicator will light for 3 seconds, and then flash once per 16 seconds
thereafter. Each time it flashes, the sensor is transmitting data.
Place the battery cover and push it to close the compartment.
Note: If the sensor does not power up after inserting the batteries, press the reset button
shown in Figure 6.
Figure 6
3.4DisplayConsole
3.4.1 Display Console Layout
The
display console layout is shown in Figure 7
Note: The following illustration shows the full segment LCD display for description
purposes only and will not appear like this during normal operation.
