User's Manual

3
3.2 Recommend Tools
z Precision screwdriver (for small Phillips screws)
z Compass or GPS (for wind direction calibration)
z Adjustable Wrench
z Hammer and nail for Foot Mounting.
3.3 Sensor Assembly Set Up
The following illustration shows the full segment for Thermo-Hygrometer,WIND and
RAIN transmitter .purposes only ,as shown in Figure 2.
Figure 2
3.3.1 Insert batteries into the transmitter. Locate the battery door on the transm
itter,
push and open the battery compartment, as show in Figure 3.
Figure 3