User's Manual

14. Outdoor dew point low alarm

15. Rainfall (1h) high alarm

16. Rainfall (24h) high alarm

17. Absolute pressure high alarm(ABS)

18. Absolute pressure low alarm(ABS)

19. Absolute pressure high alarm(REL)

20. Absolute pressure low alarm(REL)

21. Indoor temperature high alarm

22. Indoor temperature low alarm

23. Indoor humidity high alarm

24. Indoor humidity low alarm

Note: To prevent repetitive alarming of humidity, there is a 4% tolerance band. For

example, if you set the high alarm to 60% and silence the alarm, the alarm icon will

continue to flash until the humidity falls below 56%, at which point, the alarm will reset

and must increase above 60% to activate again.

8.4 Alarm and Command Key Beeper ON/OFF Mode

The beeper can be silenced for both alarms and key strokes.

In normal mode, press and hold the ALARM key for three seconds to toggle the beeper on

or off (depending on the current setting).

The BZON (beeper on) or BZOFF (beeper off) icon will appear in the time area for three

seconds. Press and hold the ALARM key again for three seconds to toggle the BZON or

BZOFF command.

9.WiFi Connection Status

When the console successfully connects to your Wi-Fi router, the Wi-Fi signal icon

will appear on the LCD display(In front of the Indoor Temperature). If the Wi-Fi

signal is not stable or the console is trying to connect to the router, the icon will flash. If

the icon disappears, it means the console is not connected to the Wi-Fi router.

Note: If you own a dual band router (2.4 GHz and 5.0 GHz),make sure you

connect to the 2.4 GHz band, otherwise it will fail to connect the weather station to

WiFi.

10. Time Server Sync Status

After the console has connected to the internet, it will attempt to connect to the internet

time server to obtain the time. Once the connection succeeds and the console’s time has

updated, the SYNC icon will appear on the LCD. The time will automatically

synchronize to the internet per an hour.

Note:Time synchronize method: Synchronized through internet UTC time server.

11. Register with WeatherCloud.net

Note: This is best done on a computer desktop or laptop.

Visit :

https://weathercloud.net/ and enter a Username, Email and Password(It is your Login

password of the websiteIt, not your email password. So no privacy will be exposed).

11.1 Sign Up