User's Manual

• Hourly Rainfall

• 24 Hour Rainfall

• Absolute Pressure

• Relative Pressure

• Indoor Temperature

• Indoor Humidity

8.1 Alarm Operation

When an alarm condition is exceeded, the alarm icon will flash (visual) and the alarm

beeper will sound (audible). To silence the beeper, press any key.

8.2 Viewing the High and Low Alarms

To view the current alarm settings, press the ALARM key to enter the alarm mode. HI will

be displayed in the time area. At the same time Alarm time parameters of out/indoor

temperature/humidity, rain, feels like, wind gust, wind average, and dew point are

displayed.

Press ALARM key again to view the LOW alarms along with the alarm clock time the

same way HI alarms.

Press the SNOOZE key at any time to return to the normal mode.

8.3 Setting the Alarms

Press ALARM key to enter the alarm mode.

Next, Press and hold the SET key for three seconds. The first alarm parameter will begin

flashing (alarm hour).

To save the alarm setting and proceed to the next alarm parameter, press(do not hold) the

SET key.

To adjust the alarm parameter, Touch the [+] or [-] key to increase or decrease the alarm

settings, or Touch and hold the [+] or [-] key for three seconds to increase or decrease the

alarm settings rapidly.

Press the ALARM key to turn on (the alarm icon will appear ) and off the alarm.

Press the SNOOZE key once at any time to return to the normal mode. After 30 seconds of

inactivity, the alarm mode will time out and return to normal mode.

The following is a list of the individual alarm parameters that are set (in order):

1. Alarm hour(alarm 1)

2. Alarm minute(alarm 1)

3. Alarm hour(alarm 2)

4. Alarm minute(alarm 2)

5. Wind Gust high alarm

6. Wind Average high alarm

7. Outdoor temperature high alarm

8. Outdoor temperature low alarm

9. Outdoor humidity high alarm

10. Outdoor humidity low alarm

11. Outdoor feels like high alarm

12. Outdoor feels like low alarm

13. Outdoor dew point high alarm