User's Manual

6. Change Day.Press the SET key again to set the calendar day. Press the [+] key or [-]

key to adjust the calendar day.

7. Change Year. Press the SET key again to set the calendar year. Press the [+] key or [-]

key to adjust the calendar year.

8. Max/Min Clearing (default: ON). Press the SET key again to set the max/min

clearing mode (CLR). The Max/Min can be programmed to clear daily (at midnight)

or manually. Press the [+] key or [-] key to switch between “Clears 24h” and Clears

Manually.

9. Temperature Units of Measure (default: °C):. Press the SET key again to change the

temperature units of measure (the UNITSET icon will be displayed). Press the [+] key

or [-] key to switch between °F and °C units of measure.

10. Wind Speed Units of Measure (default: m/s). Touch the SET key again to change

the wind speed units of measure . Touch the [+] key or [-] key to toggle the wind speed

units between m/s,bft,knots,mph or bft.

11. Rainfall Units of Measure (default: mm). Touch the SET key again to change the

Rainfall units of measure. Touch [+] key or [-] key to toggle the rainfall units between

mm and inch.

12. Barometric Pressure Display Units(default: hPa). Press the SETkey again to change

the pressure units of measure. Press the [+] key or [-] key to toggle the pressure units

between mmHg, inHg or hPa.

13. Pressure Threshold Setting (default level 2). Press the SET key again adjust the

Pressure threshold setting. Press [+] key or [-] key to adjust the pressure threshold

setting up or down.

14. Weather Forecast Icon Setting (default: partly cloudy). Press the SET key again to

set the weather forecast icon initial conditions (based on the current weather

conditions). Press the [+] key or [-] key to toggle weather icons between sunny, partly

cloudy, cloudy, or rainy.

15. Time SYNC(default:ON).Press the SET key again to set the network time sync. Press

the [+] key or [-] key to switch between SYNCtime ON and SYNCtime OFF of

measure.

16. Location division.(default: Northern Hemisphere) Press the SETkey again to

change the location division. Press the [+] key or [-] key to toggle the sunlight units

Northern Hemisphere (NOR)or Southern Hemisphere(SOU).(refer to 5.0 Final

Installation of Integrated outdoor transmitter)

7.3SensorSearchMode

If Outdoor sensor loses communication, dashes (--.-) will be displayed.

To reacquire the lost signal, press and hold the CH/+ button for 3 seconds to enter the

sensor search mode.

7.4ResetMin/Maxrecord

Note: The minimum and maximum value of all channels will be cleared in the reset

mode.

In normal mode, Press (do not hold) the MIN/MAX/-key, and the MAX icon will be

displayed. Press the SET key to view rainfall (1h, 24h, week or month) , pressure (ABS or

REL) max value ,outdoor temperature (temperature, dew point or feels like).