User's Manual

replace the batteries in the sensor with fresh batteries. Be sure to never mix old and new

batteries, and never mix battery types such as alkaline and lithium together.

7. Console Operation

Note: The console has five keys for easy operation: SET key and ALARM key on the

right side, MIN/MAX/-key, SNOOZE/LIGHT and CHANNEL/+ key on the top.

7.1 Quick Display Mode

Note: To exit the Quick Display Mode at any time, press the SNOOZE button of the

display console.

While in Normal Mode, press (do not hold) the SET key to enter the Quick Display Mode

as follows:

• once for time/second/date, time/week/date and time/week/year

• twice for rainfull.

• three for pressure

• four for outdoor dew point temperature

1. Time, Time/Week and Date. Press the CHANNEL/+ or MIN/MAX/- key to toggle

between time/second/date, time/week/date and time/week/year.

2. Rainfall. Press the CHANNEL/+ or MIN/MAX/- key to toggle between 1h, 24h, week,

month and total.

To clear the total rain, press the CHANNEL/+ or MIN/MAX/- button until total rain is

displayed. The total rain will flash. Press and hold the SET button for three seconds until

total rain reads 0.0.

3. Absolute Pressure and Relative Pressure. Press the CHANNEL/+ or MIN/MAX/-

key to toggle between absolute pressure and relative pressure.

4. Outdoor dew point .Press the CHANNEL/+ or MIN/MAX/- key to toggle between

temperature, dew point and feels like

7.2 Set (Program) Mode

While in Normal Mode, Press and hold the SET key for at least three seconds to enter the

Set Mode. The first setting will begin flashing. You can press the SET key again to skip

any step, as defined below.

Note: In the Set mode, press the [+] key or [-] key to change or scroll the value. Hold

the [+] key or [-] key for three seconds to increase/decrease rapidly.

Note: To exit the Set mode at any time, press the SNOOZE button of the display

console.

1. 12/24 Hour Format (default: 24h):.Press the SET key again to adjust the 12/24 hour

format setting (FMT). Press the [+] key or [-] key to change between 12 hour and 24

hour format.

2. Change Hour.press the SET key again to set the hour. Press the [+] key or [-]key to

adjust the hour up or down. Note the PM icon is present during afternoon hours.

3. Change Minute.Press the SETkey again to set the minute. Press the [+] key or [-] key

to adjust the minute up or down.

4. Date Format (default: MM-DD): Press the SET key again to enter the day/month

format mode. Press the [+] key to switch between M-D, D-M.

5. Change Month.Press the SET key again to set the calendar month. Press the [+] key

or [-] key to adjust the calendar month.