User's Manual

12
Note: Console has to be location division setting so that the directions on the sensor
are matching with your real location. Permanent wind direction error（read approximately
180º）will be introduced when the wind direction sensor is not positioned correctly during
installation.
Fasten the integrated transmitter to mounting pole brackets with foot-mounting, two ￠3
bolts and M3 nuts , as shown in Figure 15
Figure 15
Tighten the mounting pole to your mounting pole(purchased s
eparately) with the four￠5
Bolts and M5 Nuts assembly, or fix on the wall with four tapping screw, as shown in
Figure16.