User's Manual

11
Step 1:There is a “S” indicator on the wind vane that indicates South, as shown in Figure
14. Align this “S” marker in the direction of South.
Step 2: Console operation is set to Northern Hemispheres ( NORin the time area) in
Location division.
Note: There are four alphabet letter of “N”,”E”,”S”and “W” around the wind direction,
representing for the direction of North, East, South and West. Wind direction sensor has to
be adjusted so that the directions on the sensor are matching with your real location.
Permanent wind direction error will be introduced when the wind direction sensor is not
positioned correctly during installation.
Northern Hem
ispheres
Figure 14
Southern Hem
ispheres
5.2. Southern Hemispheres (SOU).
For Southern Hemisphere installations, ignore these(N, S, E, W) and face the solar panel
to the North (and in a sunny position) when installing the Integrated outdoor transmitter.
Step 1: Install the Integrated outdoor transmitter and face the solar panel North.
Step 2: Console operation is set to Southern Hemispheres ( SOU in the time area) in
Location division.