User's Manual
Page 6
Indictor LED Status Description
RF work green light-5
ON when the sensor search success.
Flash when enter the sensor search mode.
OFF when no receive any transmitter.
WiFi work white light-4
ON When the Receive successfully connects to the Wi-Fi
router.
Flash when enter the WAP mode.
OFF when the Receive is not connected to the Wi-Fi router.
Net work red light-3
ON When the Receiver is not transfer data to the internet
more than 30 minutes.
Flash When the Receiver is transmitting data.
OFF When the Receiver successfully transfer data to the
internet.
8.2 ReceiverPowerUp
Note: Power up the rain gauge, anemometer and the 8-channel sensors first before powering up the
console. If you power up the console first, you will need to resynchronize the sensors.
Make certain the weather station sensors are at least 10'away from the console and within
100'of the console. If the weather station is too close or too far away, it may not receive a proper signal. If
you have more than one thermo-hygrometer transmitter, make sure they are all powered up and transmitting
on different channels.
Figure 50
The wind speed, wind gust, wind direction, rain, outdoor temperature and humidity will update on the
display within a few minutes. Do not Press any menu buttons until the outside transmitter report in,