User's Manual
Page 28
• Wind sensor: 4 x AAA alkaline batteries or Lithium batteries (not included)
• Battery life: Minimum 12 months for base station with excellent reception. Intermittent reception
and multiple sensors may reduce the battery life.
Minimum 12 months for sensors (use lithium batteries in cold weather climates less than -4 °F)
16.4 WiFiSpecifications
• WIFI Standard: 802.11 b/g/n
• WiFi Console WiFi Frequency: 2.4 GHz
• Setup User Interface (UI) support setup device: Build-in WiFi with WAP mode smart device,
including desktops, laptops, tablets or mobile devices
• Recommend web browser for setup UI: Web browser support of HTML 5, such as the latest
versions of Chrome, Safari, IE, Edge, Firefox, Mozilla or Opera.
• Line of sight WiFi RF transmission (in open air): 80 feet
17.Maintenance
1. Clean the rain gauge once every 3 months
2. Replace the wind, rain and thermo-hygrometer transmitter batteries once every 1-2 years
18Troubleshooting
For troubleshooting, please visit:
19 Maintenance
• Clean the rain gauge once every 3 months. Pull out the Rain Gauge Filter drawer, as shown in Section
6.2.1.
• Replace the wind, rain and thermo-hygrometer transmitter batteries once every 1-2 years
• Clean the anemometer solar panel once every 3 months.
20 Accessories
The following software and hardware accessories are available for this weather station at
Accessory Description
Ambient Weather
SRS100LX Temperature
and Humidity Solar
Radiation Shield
Solar Radiation Shield improves temperature accuracy for hot weather
climates. Install over thermo-hygrometer.
Ambient Weather Humidity
Calibration Kits
One step calibration kits for digital hygrometers use salt slurry formula
to accurately calibrate the indoor and outdoor hygrometers.