User manual. www.unit1gear.
EN Congrats! You are among the first to ever experience FARO. This embodies the work of creators, designers, engineers and entrepreneurs trying to build something unique. FARO is our best shot at what an urban commuter helmet should be and our small input towards making the roads safer. You are now a part of this story - you helped make this happen. Wear it with pride. Welcome to the UNIT 1 familiy. www.unit1gear.
EN IMPORTANT Please read this manual carefully before using your helmet.
1. Safety information EN WARNING FARO was made for non-motorized recreational pedal cycling only. No helmet can prevent against all injuries. Serious injury or death may occur while cycling even with a helmet. Unit 1 Gear, Inc. and/or its subsidiaries make no claim that this helmet will eliminate all posibilities of injury. Lights are a supplement (not a replacement) of regular mounted bike lights. Certain places have laws that require lights, comply with local regulations.
2. Package content 1. FARO Helmet 2. USB Type-C / Type-A EN 3.
3. Overview 1.1 EN 1.4 1.5 1.2 1.6 1.7 1.3 1.8 1.1 Front light / 1.2 MIPS liner (optional) / 1.3 Magnetic buckle / 1.4 Back light / 1.5 Hidden lights / 1.6 Power button / 1.7 Charging port / 1.
4. Fitting instructions EN How to wear your helmet FARO has a great fit. Follow these instructions carefully to aply your helmet correctly. Consult us if you are not sure which features your helmet has. A correct fitted helmet should sit comfortably on your head without pressing or chafing and should not move foward to obscure your vision or reaward to expose your forehead. Please make sure the helmet is positioned the right way. Be sure to position the buckle under the chin and back against the throat.
EN Adjust your buckles To lock the Magnetic buckles bring the two parts together until they snap. To unlock them, slide them sideways as shown below. To keep the chinstrap from loosening or flapping, it must be tucked through the keeper. Fitting system Tighten or loosen the Fitting system dial to fit the circumference of your head as required.
5. Function guide EN UNIT 1 App By simply pairing your phone with your Bluetooth system, you can use the FARO app for quicker, easier setup and management. Download Android: Google Play Store > FARO app iOS: App Store > FARO app or scan the QR code below.
EN Helmet functions overview Power on / off Press & hold the power button for 1 sec.
EN Charging Pull and turn the silicone lid. Then plug the USB-C cable into the charging port. Once plugged in the hidden lights will display the status of your battery using 6 levels. All 6 levels in a solid green color mean the battery is full. For safety purposes,FARO functions are not avaliable while charging. DO NOT use the helmet while charging with a powerbank. Pairing FARO with the U1 App 1. Make sure your phone’s bluetooth connection is active. 2. Power up your helmet 3.
EN Pairing FARO with a Navigation Remote 1. Power on your helmet (should be off before you begin) 2. Press & hold any button on the Nav Remote (lights will blink left & right) 3. Wait for connection. Helmet will show 3 green flashes when complete, Nav Remote will also flash 3 times. Troubleshooting If you are having trouble with your helmet, follow these steps. Not powering on Charge the helmet using the USB-C cable. Not charging Make sure the USB-C power source is switched on and plugged correctly.
6. Navigation remote EN The navigation remote is an optional feature. Installation Attach the dock to your handlebar using 1 of the rubber bands included in the package. Do so by looping the band in the center of the dock as shown below. Place the remote on the dock and twist it clockwise to lock it into place. 3.1 3.2 3.3 3.4 3.1 Navigation remote / 3.2 Dock / 3.3 Rubber pad / 3.
EN WARNING For the Navigation Remote to work properly, always align it perpendicular to the ground and facing up. If the Navigation Remote is not properly aligned, brake lights maynot work correctly, which could lead to serious injury or death.
EN Navigation remote function overview Action with L&R button - 1 tap (L or R): Turn signal Activation If set on Automatic, turn signal will end automatically after designated time If set on Manual, Turn Signal will end by tapping any button (L or R) - hold 3 secs: System reset Pairing your Navigation Remote 1. Start with both Helmet & Nav Remote OFF and close to each other (Fig 1.) 2. Power on your helmet 3. Press & hold any button on the Nav Remote (lights will blink left & right) (Fig 2.) 4.
EN Charging Pull and turn the silicone lid. Then plug the USB-C cable into the charging port. Use the same cable than the helmet. Troubleshooting If you are having trouble with your Navigation Remote, follow these steps. Not powering on Charge the remote using the USB-C cable. 1. 2. Not charging Make sure the USB-C power source is switched on and plugged correctly. The LED indicator will display a slow pulse when charging.
5. More aboult your helmet EN General safety No helmet can protect the wearer against all posible impacts. A severe impact, sharp object, imporoper use, or incorrect adjustment could cause conditions beyond the protection of the helmet. To be effective, a helmet must fit and be worn correctly. The helmet is designed to be retained by a strap under the lower jaw. To check for correct fit, place the helmet on your head and make any adjustments inducated. Securely fasten retention system.
EN SPECIFICATION OF RADIO TRANSMISSION PRODUCT: FARO FARO Navigation Remote MODEL NUMBER: FARO_HELMET FARO_REMOTE OPERATING FREQUENCY: 2402 - 2480MHz 2402 - 2480MHz POWER: DC 3.7V 1850mAH DC 3.
EN NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EN Helmet care Store your helmet in a dry place, away from excessive heat soulrces like radiators, automobile trunks or direct sunlight. Clean your helmet only using a slighty damp soft cloth or sponge. The helmet can be damaged using chemical cleaners, specialy petroleum base solvents. Replace your helmet if there is any sign or hint of damage, DO NOT use a damaged helmet. Using a damaged helmet or worn may result in more serious injuries in the event of a fall.
6. Warranty EN 1 year limited warranty Unit 1 Gear, Inc. warrants to the original purchaser of this product that the product is free of defects in material and workmanship for a period of (1) year from the original date of purchase. This warranty does not apply to defects of physical damage resulting from abuse, neglet, improper repair, improper fit, alterations, or use unintended by the manufacturer.
EN contact@unit1gear.com Unit 1 Gear, Inc. 3411 Silverside Road, Rodney Building #104 Wilmington. DE 19810 USA. www.unit1gear.com youtube.com/unit1news facebook.com/u1gear instagram.
www.unit1gear.
