User's Manual

15
EN
Pull and turn the silicone lid. Then plug the
USB-C cable into the charging port. Use the
same cable than the helmet.
Charging
Troubleshooting
If you are having trouble with your Navigation
Remote, follow these steps.
Not powering on
Charge the remote using the USB-C cable.
Not charging
Make sure the USB-C power source is
switched on and plugged correctly. The LED
indicator will display a slow pulse when
charging.
Not pairing
Move the device closer to each other and
away from any interference or obstruction.
Make sure the helmet is not connected to
another remote when entering pairing mode.
Remote not responding
Reset the remote by pressing & holding
either button for 3 seconds.
3.
1.
2.