Specifications

OPERATOR MANUAL
Pag. 23
4.2 How to prepare and load checks
Preparing Documents for Processing
1. Remove all rubber bands, staples, paper clips, dog ears, etc. from the documents.
2. Jogging the documents is strongly recommended. In any case, align the bottom edges by
repeatedly tapping the bottom edge of the documents on a hard, flat surface, see Fig.1.
3. Repeatedly tap the leading edge of the documents on a hard, flat surface, see Fig.2.
4. Check bottom and leading edges once more to ensure documents are aligned.
Bottom edge
Leading edge
Fig.1 Fig.2
Panini 14-05-2004 9:26 Pagina 23