Specifications

Fig.1
OPERATOR MANUAL
Pag. 15
3.2 Power cables connection
Before connecting the scanner to your PC, make sure to locate the unit on a flat surface near the PC, away
form direct light and from electromagnetic equipments.
Warning: The electromagnetic emission from a CRT monitor can produce interference and effect the
MICR reading, place the My Vision X as far as possible from theCRT.
1. Plug the power cord connector in the Power Supply socket (Fig.1)
2. Plug the Power Supply cable in the My Vision X power connector (Fig.2)
Fig.2
Panini 14-05-2004 9:26 Pagina 15