UT30P Quick Start Guide
Charging Indicator light Ambient light sensor Menu button Front camera Home screen button Increase volume Back button Decrease volume Microphone Power button Extended function button 1 Extended function button 2
External device docking station Rear camera NFC External antenna port Battery cover lock B Battery cover lock B Battery cover lock A 3.
1. Battery Charging • Charge with travel charger Insert the small plug end of the USB data cable into the TYPE-C port of the device, insert the large plug end of the USB data cable into the travel charger plug, and then insert the travel charger plug into a power outlet to charge. • Charge with USB data cable Connect the cable and the device with USB type-c interface, and plug in the other end with adapter.
Figure 2 • Face the SIM card metal contacts downwards and push into the slot. Take note on the direction of the notched corner. • Face the MicroSD card metal contacts downwards and push into the slot. Take note on the direction of the notched corner. • Align the contacts of the battery with the terminals of the battery compart ment and put in the battery gently.
3. Turning the device on and off To turn on the device, firmly press and hold the bottom right【Power Button】until the boot screen appears. To turn off the device, firmly press and hold the 【Power Button】 to display the options menu. Select the Power off option to shutdown.
• Expanding the home screen Swipe your finger horizontally on the home screen to expand to the left or right of the home screen. - Adding an icon on the home screen Press and hold any application or widget icon and drag it to an empty area on the home screen. - Moving icons on the home screen Press and hold the icon on the home screen and drag the icon to the desired location on the screen.
6. Installation and management of applications Users can enter the applications store to download and install related application programs. Slide the screen left or right → "Settings", select "Apps", or touch the [Menu button] → "Manage apps" to view and manage application programs on your device. 7. Using Beidou/GPS positioning function Slide the screen left or right → "Settings", select "Location Information" to go into the location service panel, turn on the location information switch.
. Mobile network connection (WLAN/Bluetooth) • WLAN connection Slide the screen left or right → "Settings" to go into the settings panel, go to the WLAN options and turn the "On" switch to activate WLAN. After WLAN is turned on, the WLAN icon will be displayed in the status bar. Select the connection to be used from the list of available networks and follow the prompts to enter the network key to connect.
PRODUCT SAFETY WARNINGS Use responsibly. Read all instructions and safety information before use to avoid injury. The maximum operating ambient temperature of the equipment is 55°C. ① Battery safety Battery works at ambient temperatures ranging from-20°C to 55°C. (1)CAUTION: Risk of explosion if battery is replaced incorrectly. Replace with the same or equivalent type of battery as recommended by the manufacturer. Dispose used batteries according to battery manufacturer’s instructions.
Notice 1. Some special places, such as airports, hospitals, gas stations and other places, do not allow the use of electronic equipment. Please comply with the rules and do not use this product in these places. 2. For your safety and the safety of others, please do not use this product while driving a vehicle. 3. In order to avoid potential safety problems, do not put this product near the vehicle's airbag. 4. For your safety, please do not use this product during thunderstorms. 5.
Battery Instructions 1. This product uses a rechargeable lithium battery as a power source. When the power is low, please charge the battery. To maintain battery life, it is recommended to deplete the battery's power before charging. 2. When the battery charger is not in use, please remove it from the power supply. Do not connect the charger to the battery for more than one week. Excessive charging will shorten the battery life. 3. Temperature affects the battery charging limit.
NOTICE: The SAR limit of Europe is 2.0 W/kg. Device types UT30P has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use on the body is 1.08W/kg This device was tested for typical body - worn operations with the back of the handset kept 0 cm from the body. To maintain compliance with RF exposure requirements, use accessories that maintain a 0 cm separation distance between the user's body and the back of the handset.
NOTICE: This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Antenna Type FPCAntenna Power: GSM/GPRS/EGPRS900:33dBm GSM/GPRS/EGPRS1800:30dBm WCDMA/HSDPA/HSUPA Band 1:22.5dBm WCDMA/HSDPA/HSUPA Band 8:23dBm LTE FDD Band 1:22.5dBm , LTE FDD Band 3:23dBm , LTE FDD Band 7:23dBm , LTE FDD Band 8:23.5dBm,LTE FDD Band 20:23dBm , LTE FDD Band 28:23dBm , LTE TDD Band38: 22.5dBm , LTE TDD Band 40: 23dBm GSM Release 99 ;WCDMA Release 6 ;LTE Release 8 WIFI and BT 2400-2483.5MHz : 14 dBm WIFI(5150-5250MHz): 12dBm WIFI(5725-5850MHz) : Power:11dBm ,Receiver category:2 NFC : 13.
www.UniStrong.
