TZHEF08 Embedded DVR User Manual Digital Video Network Surveillance System Unisight Digital Technologies, Inc.
Digital Video Network Surveillance System TZHEF08 series Net DVR User Manual (V2.0) Thank you for purchasing Unisight Embedded DVR. This manual applies to TZHEF08 Series Net DVR. Please read it carefully for the better use of the product. The contents in this manual are subject to change without notice.
Digital Video Network Surveillance System Index Chapter1 Product Introduction......................................................................................................5 1.1 Summary......................................................................................................................5 1.2 Features........................................................................................................................5 2.1 Checking the DVR and Its Accessories .........................
Digital Video Network Surveillance System Example: PPP (Modem) passive dialup through PSTN.................................................................................... Chapter6 Utilities........................................................................................................................75 6.1 Restore Parameters ....................................................................................................75 6.2 Upgrade ..........................................................
Digital Video Network Surveillance System Chapter1 Product Introduction 1.1 Summary TZHEF08 series network digital video recorder is an excellent digital surveillance product. It uses the embedded MCU and Linux, combining the most advanced technology in Information Industry such as video and audio encoding/decoding, hard disk record and TCP/IP. The firmware is burned in the flash, more stable and reliable.
Digital Video Network Surveillance System Preview & Playback function: Support one composite video output and one spot video output Support playback fast, slow, pause, forward, backward, frame by frame, etc. Use define preview layout. Support one channel playback Network function: Support TCP, UTP, RTP, Multicast, DHCP, etc. Support ADSL (PPPoE) dialup function. Remote parameters setup. Remote playback, download the recorded files in DVR. Remote upgrade DVR firmware. Remote control PTZ.
Digital Video Network Surveillance System Chapter3 Operational Instructions 3.1 Front panel introduce Fig 3-1 Front panel introduce Form 3-1 Items on front panel Index 1 2 Type Name Lamp USB Numeric Keys MENU 3 Function Keys 2 3 ESC EDIT Description IR receiver. USB interface Input number, lower case, upper case character and symbols. 1. Switch preview mode into menu; 2. Brush control short key[WIPER]. 3. Press [MENU]for more than 5 seconds to cancel button beep sound. [ZOOM-]in PTZ control.
Digital Video Network Surveillance System symbol); 2. 3. 4 State Lamps 5 Control Keys SHIFT READY STATUS ALARM RECORD NETWORK Direction Keys ENTER 3.2 [FOCUS+]in PTZ control; In preview mode, display or hide the channel status bar. Switch between numeric keys and function keys DVR is ready. Green means you can use IR remote control. Red means there is alarm. Twinkle in red means reading or writing HDD. Network status. Composed of [Ç],[È],[Å] and [Æ]. 1.
Digital Video Network Surveillance System Form 3-2 Instruction of IR Index Name Description 1 POWER Turnoff device. 2 DEV Enable/Disable IR remote control 3 Numeric Keys Same as numeric keys of front panel. 4 EDIT Same as EDIT key of front panel. 5 A Same as A key of front panel. 6 REC Same as REC key of front panel. 7 PLAY Same as PLAY key of front panel. 8 INFO Same as INFO key of front panel. 9 VOIP Same as VOIP key of front panel. 10 MENU Same as MENU key of front panel.
Digital Video Network Surveillance System Switch the device power on, wait without any operations until preview screen appears, and then you can use IR remote control to manage DVR on condition that the device ID is default “255”, which can be changed in “Display” menu. If the default device ID has been changed, please press [Power] & [DEV] key of IR remote control, input the present device ID and then press [ENTER] key. Then you can use IR remote control to operate this DVR.
Digital Video Network Surveillance System 3.3 Menu Description 3.3.
Digital Video Network Surveillance System Exceptions User Password Add or delete user Password setup or modification User rights setup Utilities Restore parameters Upgrade firmware HDD management Stop alarm output Reboot View log System information 3.3.2 Menu Operation How to enter into menu mode 1) Press [MENU] key to enter into DVR main menu. 2) Press [PLAY] short key to enter into playback menu. 3) Press [REC] short key to enter into manual record menu.
Digital Video Network Surveillance System Fig 3.3 Main menu There is one small frame named “Active Frame”. It can be moved from one item to another by using direction keys ([↑][↓]). When the “Active Frame” is located on one icon, you can press [ENTER]key to enter into the sub menu. For example, move the “Active Frame” to “Image” icon, press [ENTER] to enter into the sub menu as following fig 3.4: Unisight Digital Technologies, Inc.
Digital Video Network Surveillance System Fig 3.4 Camera input adjustment Each menu contains different kinds of items. There is a small rectangular frame named “Active Frame” which is pointing to the selected item. This “Active Frame” can be moved by direction keys ([↑][↓][←][→]). There are several kinds of menu items as following: 1. Check Box: Provides two options, “9” means enable and “×” means disable. You can use [ENTER]or[EDIT]key to switch over. 2. List Box: Provide more than 2 options.
Digital Video Network Surveillance System save parameters and return to parent menu. Press [Cancel]button to cancel and return to parent menu. The button in grey means it can be operated only after it is enabled. How to exit menu Press [PREV]key to exit menu and return to preview mode. 3.
Digital Video Network Surveillance System Turn on the power switch in the rear panel. When DVR is started,[POWER]lamp is in green. On the monitor or VGA display, DSP and HDD initialization process will be shown. The first line represents DSP initialization. If the DSP icon is “×”, it means that the DSP is initialized error, please contact administrator at once. The second line represents HDD initialization. If the HDD icon is “×”, it means the corresponding HDD is not installed or not detected.
Digital Video Network Surveillance System Fig 4.1 Recording status Form 4-1 Camera record status Icon Icon Color Status Description White No video signal Yellow Video input Pink Manual recording Green Real time recording Blue Motion detect recording Red External alarm recording Unisight Digital Technologies, Inc.
Digital Video Network Surveillance System Fig 4.2 Alarm status Camera alarm status is following: Form 4.2 Camera alarm status Ico n Col or Icon Status Description White Video signal lost Yellow View tampering alarm Pink Motion & External alarm Green No alarm Blue Motion alarm Red External alarm Press numeric keys to switch over individual camera preview. For example, Unisight Digital Technologies, Inc.
Digital Video Network Surveillance System press[2]key to preview 2nd camera. Press[EDIT]key to manual cycle preview. You can set the auto preview mode in “Preview” menu, referring to 5.11. Press[PREV]key to switch multi-screen preview. 4.3 User name and password Note: When DVR is delivered from factory, there is only one default administrator named “admin”, and password is “12345”. The administrator’s name can not be modified, while the password can be modified.
Digital Video Network Surveillance System Fig 4.4 Input password Fig 4.5 Main menu Step 2: Select the objective user name by using [↑],[↓] then move the “Active Frame” to “Password” icon by using[Æ]/[Å]keys. As fig 4.6 shows. Unisight Digital Technologies, Inc.
Digital Video Network Surveillance System Fig 4.6 Modify users’ password Step 3: Input new password Use numeric keys to input new password. The password can be null. It also can be 16 numerals. Press[ENTER]to exit edit box, and move to “Verify” item to verify password. Note: In edit box, use [Æ]/[Å]to move cursor and[EDIT]key to delete the numeral in front of the cursor. Step 4: Modify password successfully Move the “Active Frame” to “Confirm” button, press[ENTER]key.
Digital Video Network Surveillance System input the correct password, you can enter into PTZ control interface. In menu mode, press[PTZ]key, you can enter into PTZ control interface directly. Shown as following picture. Fig 4.7 PTZ Control interface Currently controlled camera’s name is displayed which the position is defined by yourself. Select channel In PTZ control mode, you can press numeric keys to select channel. For example, press[2]key to select the second camera PTZ.
Digital Video Network Surveillance System IRIS control keys: [IRIS+],[IRIS-]; Adjust preset keys: [REC/SHOT]; Auto control key: [PLAY/AUTO]; Wiper control key: [WIPER/MENU]; Light control key: [LIGHT/F1]; Auxiliary device control key:[AUX/F2] Adjust preset description In PTZ control mode, press[REC/SHOT]key, and press the preset number (three numeric keys), DVR will adjust the corresponding preset number. Repeat pressing[REC/SHOT]key, and press the preset number, DVR will adjust that preset number.
Digital Video Network Surveillance System Fig 4.8 Manual record interface Description Manual record interface has following parts: channel number, channel status, start/stop record, start all and stop all buttons. Channel: List the channel number that DVR has. means idle. Green means the Status: Channel work status has 4 cases: channel is recording (including real time recording, alarm recording, motion detection recording). Red means network transmission.
Digital Video Network Surveillance System 4.6 Playback Note: The user must have “Playback” right. Playback interface In preview mode, press[PLAY]key, in the pop-up login dialog, select username and input correct password, you can enter into “Playback” interface. In menu mode, press[PLAY]key, you can enter into “Playback” interface directly. Show as Fig 4.9(The two screen play back function may canceled ,so the second channel option may not displayed) Fig 4.
Digital Video Network Surveillance System Time Section: You can define the search time section. Move “Active Frame” to the time edit box, use numeric keys to input the detail time. Search: Search the matched recorded files and display them in the list box. If there is not matched file, a corresponding dialog box will be pop-up. Play by Time: Playback the recorded stream directly based on the time section. Select Page: In the file list box, each page will only display 8 files.
Digital Video Network Surveillance System Total Time. Display/Hide information bar: [MENU] Open/Close sound: [PLAY] Adjust play progress: [←](Backward),[→](Forward). The unit is “%”. Adjust play speed: Normal speed is “1x”. Use [↑]to increase play speed ( 2X, 4X, 8X and MAX). Use[↓]to decrease play speed (1/2X, 1/4X, 1/8X and single) Pause/Continue: Press [ENTER]to pause/continue playback. If played frame by frame, Press[ENTER]to play one frame.
Digital Video Network Surveillance System Fig 4.11 Play back control bar There is an additional bar appears. We call it control bar. Control bar descriptions: : You can click these buttons to skip backward or forward 3% each time. : You can click these buttons to select the play speed : Click this button to pause. : Click this button to be mute, click it again to recover the sound. : Click this button to start copy the segment, click it again to stop.
Digital Video Network Surveillance System : Click this button will trigger a rectangle area on the screen ,draw the rectangle with left key of your mouse to the area you want to zoom in then double click left key to zoom in that place. Click left key again to return to the playback interface. 4.7 Backup Recorded Files Note: The user must have “Playback” right. Please connect with backup devices before you start to backup. In the playback interface, you can backup the recorded files.
Digital Video Network Surveillance System stays at the file you wan to backup, press[EDIT]key to select it. The symbol “9” is the selection tag. You can use the same method to select other files you want to backup. After finish, you can do next step. Shown as following fig 4.12 Fig 4.12 Playback list Step 3: Select backup device Please confirm the backup device: USB flash memory, USB HDD, USB CDR/W, and select the corresponding backup device.
Digital Video Network Surveillance System up. If you press “Confirm” button, DVR will start to backup the selected segments. If you press “Cancel” button, DVR will abort backup. Playback the video segment You can use our file player software to playback the video segment in PC. You can find the player software in attached CD. Exit playback interface Please refer to chapter 4.6. 4.
Digital Video Network Surveillance System Password modification Press[MENU]key, in the login dialog, select the username as “admin”, use[→]key, move cursor to password edit box, input “12345”, press “Confirm” to enter into administrator menu. Fig 5.1 Enter into user menu Move “Active Frame” to “User” icon, press[ENTER]key to enter into “User Management” menu. Shown as fig 5.2 Unisight Digital Technologies, Inc.
Digital Video Network Surveillance System Fig 5.2 User management In the user name list box, only “admin” is existed. You can use[→]key, move “Active Frame” to password edit box, and press[EDIT]key to enter into edit status. Press numeric keys to input the new password. The password is only combined by 16 numerals at most. After you finish inputting password, press[ENTER]key to exit. Move “Active Frame” to “Verify password” edit box, input the verify password.
Digital Video Network Surveillance System again. 5.2 Add and Delete User Enter into “User Management” interface. Add user The steps are following: Step 1: Enter into “User Management” menu as fig 5.4 Please refer to chapter 5.1 Fig 5.4 user management Step 2: Add new user name In the “User Management” menu, move “Active Frame” to “Add” button and press [ENTER], in the pop-up dialog, input the new user name (refer to chapter 3.4), press [ENTER]and return “User Management” menu.
Digital Video Network Surveillance System Fig 5.5 Input user name Step 3: Setup the password for new user After you add one new user, the password is null. You can skip this step if you do not want to change the password. In the users list box of “User Management” menu, use[Ç][È]keys to select the new user name, then use[Æ]key to the password edit box. Press[EDIT]key to enter into edit box, use numeric keys to input the new password.
Digital Video Network Surveillance System Fig 5.6 Set user right Operational rights are divided into “Local” and “Remote”. You can assign the necessary rights to the user. Use[Æ][Å]key to move “Active Frame” to the corresponding right items, press[ENTER]or[EDIT]key to enable or disable the item. “9” means assigning the right to that user. Step 4: Save the new user’s password and rights In the “User Management” menu, press “Confirm” button, the user’s password and rights will be saved and return main menu.
Digital Video Network Surveillance System DVR, etc. “Remote”: PTZ Control: Remote control PTZ; Record: Remote manual start/stop recording; Set parameters Setup: Remote setup the DVR parameters; Log: Remote view the log on DVR; Utilities: Remote upgrade firmware, format HDD, reboot DVR and shut down DVR, etc. Talk: Client talks with DVR; Alarm: Remote control DVR alarm output; Local Video Out: Remote control DVR video output; Com Control: DVR RS-232 transparent channel function.
Digital Video Network Surveillance System 5.3 Unit Name and Device ID Unit name In the “Display” menu, shown as fig 5.8: Fig 5.8 Display menu There is an item named “Unit Name”. The default unit name is “Embedded Net DVR”. Move “Active Frame” to unit name edit box, press[EDIT]key to enter into edit status, you can modify the unit name. About how to input characters, please refer to chapter 3.4. Press[ENTER]key to finish modification.
Digital Video Network Surveillance System status, you can use numeric keys to input new device ID. The device ID value is ranged among 01-255. After you finish the modification, press “Confirm” button to save and take effect or press “Cancel” to abort modification. 5.4 Video Output Standard and VGA Setup Video output standard There is one VOUT BNC connector at the rear panel of DVR. It is used to connect with analog monitor and can support PAL or NTSC video output.
Digital Video Network Surveillance System Fig 5.9 Input camera number The steps of camera name setup: Step 1: Select one camera. Step 2: Move “Active Frame” to camera name edit box, press[EDIT]key to enter into edit status, you can input digital number, uppercase and lowercase characters (refer to Chapter 3.4). The camera name can support 32 characters. Step 3: Press[ENTER]key to exit edit status.
Digital Video Network Surveillance System press[ENTER]and return “Camera” menu, and press “Confirm” button to save it. In the “Image Setup” menu, press “Cancel” button or[ESC]key, you can abort the modification. OSD is abbreviation of “On Screen Display”. For our embedded DVRDVS, it includes displaying system time and camera name. OSD settings include: System time, time format, time display position, camera name, camera name display position, etc.
Digital Video Network Surveillance System In “Camera” menu you can adjust the position where you want Date to display, move active frame to “Position” item on the right side of “Date OSD” item and press enter button. Then you will see the picture below. Use [↑][↓][←][→]to adjust the position of date. Shown as picture below. Fig 5.11 Set position of Data & Time 5.
Digital Video Network Surveillance System Fig 5.12 Color setup Step 2: Select camera: Please use[Ç][È]keys to select one camera. Step 3: Adjust brightness, contrast, saturation and hue: Move “Active Frame” to the “Adjust” button on the right side of Brightness, Contrast, Saturation and Hue, press [ENTER]key, you will enter into the corresponding adjust interface.
Digital Video Network Surveillance System preview and recorded. The mask area setup steps are following: Step 1: Enter into “Camera” menu: Step 2: Select one camera: You can use[Ç][È]keys to select one camera. Step 3:Enter into “Advanced settings” enable the check box beside “Privacy Mask” item, you can press[Enter]or[edit] key to change the flag into “9”, and active “Area” button.
Digital Video Network Surveillance System Fig 5.14 Area masked Disable the mask check box means cancel the mask area. 5.8 View Tampering Alarm If you enable this function, when someone blocks the camera spitefully, DVR will make warning alarm. Step 1: Enter into “Camera” menu: Step 2: Select camera: Please use[Ç][È]keys to select one camera. Step 3: Select sensitivity: move active frame to sensitivity item right beside the “View tampering” item.
Digital Video Network Surveillance System Step 5: View tampering alarm setup In “Advanced settings” menu, move “Active Frame” to “Policy” button, press[ENTER]key to enter into “View Tampering Handle” menu: Shown as fig 5.15 Fig 5.15 View tampering handle setup Step 6: Alarm schedule setup: When there is view tampering alarm happened, DVR will handle the alarm based on the schedule. You can set 4 periods for each day one week. Also you can copy the schedule of one day to other days.
Digital Video Network Surveillance System step 8. In “Image Setup” menu, press “Confirm” key to save all cameras parameters. Press “Cancel” button or[ESC]key to abort. Select “Off” option for “View Tampering”, you can delete the view tampering area. Note: Only one view tampering area can be setup for each camera. The view tampering area can not be copied. If the schedule is modified, you must reboot the device to make the parameters into effective. 5.
Digital Video Network Surveillance System Step 4: Setup alarm schedule: You can setup working schedule. Only when the video loss is happened in the schedule, DVR will response. Note: The 4 time periods can not be repeated. Please reboot DVR to make parameters into effective. Step 5: Setup alarm policy: You can select one or more response solutions, including “On Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger Alarm Output”. You can use [↑][↓]and [EDIT]key to enable or disable them.
Digital Video Network Surveillance System Fig 5.17 Motion area setup The whole screen is divided into 22*18 panes (NTSC: 22*15). There is one yellow panel on the upper left side. The motion area setup steps are the same as that of mask area setup (refer to chapter 5.7). The only differences are that you can use[PTZ]key to set the whole screen as motion area, and multi motion areas can be defined. Press[A]key to clear all motion areas.
Digital Video Network Surveillance System Fig 5.18 Motion alarm handle setup Step 6: Motion alarm record channel setup: When there is motion alarm happened, you can trigger related camera to start to record. In “Motion Alarm Handle” menu, you can select one or more record channels. Please use[ENTER]or[EDIT]key to enable the flag into “9”. Note: In order to make the cameras start recording, in “Recording” menu, you must enable recording schedule and set “Rec Type” as “Motion Detection” or “Motion | Alarm”.
Digital Video Network Surveillance System camera, DVR will pop-up them one by one every 10 seconds. When the motion alarm is disappeared, DVR will restore preview mode. Step 9: Save motion alarm setup: Press “Confirm” button to return “Image Setup” menu. In the “Image Setup” menu, press “Confirm” button to save the current camera parameters. Step 10: Save all cameras: You can repeat from step2 to step8 to setup motion detection parameters for other cameras.
Digital Video Network Surveillance System Fig 5.19 Setup preview mode Step 2: Preview properties: Preview mode: For preview mode item, you can use[↑][↓]key to select one mode. If DVR has only 1 channel, you can select only “1 Screen” option. If DVR has 4 channels, there are “1 Screen” and “4 Screen” options. If DVR has more than 4 but less than 9 channels, there are “1 Screen”, “4 Screen” and “9 Screen” options.
Digital Video Network Surveillance System Screen” preview mode so that all windows are display in the square. Secondly, move “Active Frame” to one of these windows, press numeric keys to input camera index. The small window will display that camera number. In this way you can change the display order. If you press 0, then the corresponding window will not display live video. After you define the camera preview order, you can select preview mode to meet your demand.
Digital Video Network Surveillance System Select Camera: Here all channels are listed. You can use[↑][↓]keys to select one. Stream Type: There are two options, one is “Audio&Video” stream and the other is “Video” stream only. If you want to record video and audio, please select “Audio&Video” option, otherwise you can select “Video” option to record only video. For DS-8000HSI DVR, there is only one “Video” option. Note: If you change this option, please reboot DVR to make parameter into effective.
Digital Video Network Surveillance System All day recording setup: Step 1: Enter into recording schedule menu In recording menu, use[ENTER]or[EDIT]key to enable record function (“9” flag), press “Schedule” button to enter into recording schedule menu. f 5.21 Recording schedule setup Step 2: Select one day and enable all day recording option For “Day” item, there are options: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday and Sunday. Use[↑][↓]keys to select one day.
Digital Video Network Surveillance System command. Note: The time periods in one day can not be repeat. Step 4: Copy to other days You can repeat step2 and step3 to setup for other days. Also you can copy the current day to other days. Step 5: Save Press “Confirm” back to “Recording” menu. Press “Confirm” again to save the parameters and return main menu.
Digital Video Network Surveillance System 5.22 Alarms setup External alarm input setup: Step 1: Select one alarm input Use[↑][↓]keys to select one alarm input. Step 2: Alarm type This is sensor type. You can select “Normal Open” or “Normal Close” according to the sensor type. Step 3: Enter into “Alarm in Handling” sub menu In the “Alarms” menu, there are two options for “Alarm Handling” item. One is “Ignore”, and the other is “Handle”.
Digital Video Network Surveillance System Fig 5.23 Alarm in handling setup Step 4: Alarm trigger record channel setup You can select channels to record for each alarm input. In the sub menu, you can use[ENTER]or[EDIT]key to enable record channel. “×” means disable and “9 means enable. Note: In order to trigger the channel to record, in “Recording” menu, you must enable recording and select record type as “Alarm” or other related type. Please refer to chapter 5.12.
Digital Video Network Surveillance System In “Alarm in Handling” sub menu, press “Confirm” button and return “Alarms” menu. In “Alarms” menu, press “Confirm” button to save the parameters. Step 8: PTZ Linkage Move “Active Frame” to “PTZ Linkage” button, press[ENTER]key to enter into “PTZ Linkage” setup menu: Shown as fig 5.24 Fig 5.
Digital Video Network Surveillance System Step 10: Save setup In “Alarms” menu, press “Confirm” button to save the parameters. Press “Cancel” button or[ESC]key to abort. Alarm relay output setup Step 1: In “Alarms” menu, use[↑][↓]keys to select one alarm output. Step 2: Select delay time The delay time is when the alarm is disappeared, the alarm output will continue output time. The delay time options are: 5 Seconds, 10 Seconds, 30 Seconds, 1 Minute, 2 Minutes, 5 Minutes, 10 Minutes and Manual Stop.
Digital Video Network Surveillance System When you finish setup, press “Confirm” button to return “Alarms” menu. Step 5: Copy one alarm output parameters to other alarm output In “Alarms” menu, you can copy parameters of current alarm output to other alarm output. Step 6: Save setup When you finish setup, in “Alarms” menu, press “Confirm” button to save all parameters. Note: If any schedule is modified, you must reboot DVR to make it into effective.
Digital Video Network Surveillance System or[ESC]key to abort. 5.14 Network Parameters If you want use network to access DVR, you must setup network parameters. Note: If any network parameter is modified, you must save and reboot DVR to make it into effective. In main menu, move “Active Frame” to “Network” icon and press[ENTER], you can enter into “Network” menu as following: Shown as fig 5.27 Fig 5.
Digital Video Network Surveillance System Mask: This is sub net mask. Gateway: The gateway IP is used to communicate in different network segments Remote Host IP and Port: If you set this IP and port, when there is alarm and exception happened, DVR will send information to that host IP. The center with this IP can receive alarm and exception information from DVR. You can use SDK to develop this center software. HttpPort: The port is for IE browser. The default value is 80. It can be modified.
Digital Video Network Surveillance System The DNS server with that fixed Internet IP can receive DVR information and used to resolve DVR dynamic IP. This IP server is special software, not the normal domain name server. You can use the provided SDK to develop this DNS software. DNS IP : Get your DNS IP from your ISP . Fill in this item in order to get access to a remote server with a domain name. Multicast IP: It is one D-class IP address, among 224.0.0.0 --- 239.255.255.255.
Digital Video Network Surveillance System Fig 5.29 PTZ parameters setup PTZ menu description Select channel: Select one PTZ camera. RS-485 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc. These parameters must be the same as those of PTZ. Protocol. PTZ address: Each PTZ has one different address.
Digital Video Network Surveillance System Preset setup: Preset is using one number to represent the camera’s position, zoom, focus and iris. Move “Active Frame” to “Setup” button on the right side of “Preset” item, press[ENTER]key to enter into preset setup menu. You can save 128 preset number. Please make sure the PTZ support preset function before you setup preset. Sequence setup: Each sequence is made up of several cruise points. Each cruise point includes one preset number, dwell time and dwell speed.
Digital Video Network Surveillance System to adjust iris, focus and zoom. After you finish adjusting, press[ENTER], then press “Save” button to save the preset number. You can repeat this step to setup other preset numbers. After you setup all preset numbers, press “Return” button to return “PTZ” menu. In “PTZ” menu, press “Confirm” button to save all parameters. Delete preset number: In “Preset” setup menu, input one preset number, press “Delete” button, you can delete this preset number.
Digital Video Network Surveillance System Press “Add” button to add one cruise point. Press “Confirm” button to save the cruise point into the sequence. After you finish setup the sequence number, press “StartSeq” to check the current sequence. Press “StopSeq” button to stop checking. You can delete cruise points in one sequence. After you finish sequence setup, press “Return” button back to “PTZ” menu. In “PTZ” menu, press “Confirm” button to save the modification.
Digital Video Network Surveillance System Please make sure the PTZ you are using can support cruise function. 5.16 RS232 setup There is one RS-232 port at DVR rear panel. In main menu, move “Active Frame” to “RS232” icon and perss[ENTER]key, you enter into “RS232” setup menu: RS232 menu description RS-232 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc. Work mode: The RS-232 can be used as “Console”, “PPP” or “Transparent Channel”. Console: Connect with PC serial port.
Digital Video Network Surveillance System Local IP: Only used when work mode is “PPP”. This IP is defined for DVR. Mask: Only used when work mode is “PPP”. Remote IP and Local IP are in the same sub net. Username, password and Verify password: Only used when work mode is “PPP”. Used for login when remote PC dialup through PSTN. Phone: Only used when work mode is “PPP” and PPP mode is “Active”. It is the phone number of remote PC. Callback and Data Encryption: Only used when work mode is “PPP”.
Digital Video Network Surveillance System PSTN. If you set CIF resolution, we suggest you set frame rate as 1 FPS. If you set QCIF resolution, the frame rate can be selected under 4FPS. You can adjust bit rate, resolution and frame rate according to real conditions. Step 3: Save setup In “Recording” menu, press “Confirm” button to save parameters. Step 4: Setup Modem used on DVR side Use DCE calbe to connect Modem with PC serial port.
Digital Video Network Surveillance System Security Settings” as follows: Unisight Digital Technologies, Inc.
Digital Video Network Surveillance System Step 3: Establish the dialup connection Select the Modem connected with PC just like the dialup network connection, input the telephone number connected with DVR’s modem. Input the username, password. They must be the same as that DVR PPP setup. Step 4: During the dialup connection, it will give the message of “verification of username and password”, after successfully verification; the message will be given “on process of register in PC”.
Digital Video Network Surveillance System Step 6: You can preview the image of 192.1.0.2 by using client-end software. Unisight Digital Technologies, Inc.
Digital Video Network Surveillance System Chapter6 Utilities There are many tools in “Utilities” menu. Including “SavePara”, “RestorePara”, “Upgrade”, “Hard Disk”, “Stop Alarm Out”, “Reboot”, “Power Off”, “View Log” and “System Info”. Enter into “Utilities” menu: Shown as fig 6.1 Fig 6.1 Utilities 6.1 Restore Parameters Restore factory parameters for DVR. The IP address, gateway and port number will not be restored. Shown as fig 6.2 Unisight Digital Technologies, Inc.
Digital Video Network Surveillance System Fig 6.2 Restore parameters 6.2 Upgrade You can use this function to upgrade the firmware. Please confirm the language is matched. Press “Upgrade” icon, in the pop-up dialog, you can select either “FTP” or “USB” upgrade mode. Shown as fig 6.3 Fig 6.3 Upgrade If you select “FTP” mode, you will enter into “FTP Upgrade” menu: Unisight Digital Technologies, Inc.
Digital Video Network Surveillance System Fig 6.4 FTP IP setup Input the ftp server IP and press[ENTER]key. DVR will connect with FTP server through network and download the firmware file. If you select “USB” mode, please make sure you connect one USB flash memory with DVR and the firmware file is in it’s root directory. Reboot after successfully upgrading, the system will use the new firmware. 6.3 Hard Disk Management fig 6.
Digital Video Network Surveillance System 6.4 Stop Alarm Out Clear the alarm output manually. 6.5 Reboot Reboot DVR. 6.6 Power Off Make DVR be ready for shutting down, turn of the switch on the rear panel 6.7 View Log To view the log recorded in DVR HDD. In “Utilities” menu, press “View Log” to enter into “Log” menu: Shown as fig 6.6 Fig 6.6 View log Unisight Digital Technologies, Inc.
Digital Video Network Surveillance System If you want to view the log based on default option, just press[ENTER]key. DVR will list all matched information. Also you can select options to search (By Type, By Date, By Type&Date). By Type To view log information of the assigned type. Type is divided into “Major type” and “Minor type”. Major type includes operation, alarm, exception and all.
Digital Video Network Surveillance System Step 1: Select “By Time” for “Query” option to active “Start Time” and “Stop Time” items. Step 2: Input start time and stop time. Step 3: Move “Active Frame” to “Search Log” button and press[ENTER]key to start searching. Step 4: After finish searching, DVR will list the matched log information. Step 5: Press “Return” button back to “Utilities” menu. By Type&Date View one kind of log in the assigned time period.
Digital Video Network Surveillance System Appendix A Mouse control function 1. in the preview interface Double-click the left key 1. Switch to the most pictures when viewing single picture. 2. Switch to full screen mode when viewing multi-pictures. Back to previous multi-pictures when double click again.
Digital Video Network Surveillance System 5. Test input interface Click the left key 1. pop up soft keyboard 2. Input text 3. Save and exit Click the right key Cancel the text and exit the edition Scroll wheel forward Cursor go to the front character 6. Playlist interface Click the left key Select the file to copy or cancel Scroll wheel forward Select the front file Scroll wheel backward Select the next file Signal-click the right key Cancel and return back to the preview interface.
Digital Video Network Surveillance System Appendix B HDD Capacity Calculation Calculate total capacity needed by each DVR according to video recording (video recording type and video file storage time). Step 1: According to Formula (1) to calculate storage capacity qi that is the capacity of each channel needed for every hour, unit Mbyte.
Digital Video Network Surveillance System Appendix C DVR Connect Cable Definition 1 RS-485 connect cable made method Material and tool One twist cable (8 pins), one standard RJ45 connector and one tool special for RJ45. RJ45 introduction Pin definition To make the connect cable according the follows.
Digital Video Network Surveillance System 4 5 6 7 8 DTR GND -RTS CTS O -O I Terminal Device Ready Ground -Request to Send Clear Data 3 UTP network connect cable made method Material and tool One twist cable (8 pin, the length can be defined as to the actual demand, but must be within 100m), 2 standard RJ45 head, one tool for RJ45. Suggestion: have a network cable test tool to test each cable made.
Digital Video Network Surveillance System The corresponding relationship of cross cable Unisight Digital Technologies, Inc.
Digital Video Network Surveillance System Appendix D Troubleshooting Failure After plugging in power, turning on the power switch, “POWER” light in front Panel does not turn on, and fan does not work. After plugging in power, turning on the power switch, “POWER” light in front panel turn to green while fan does not work. After plugging in power, turning on switch, “POWER” light turn to green, the indicator lights in the panel turn on at the same time, but fan does not work.
