System information

31
SELECTING THE SWITCHON CHANNEL
This screen allows you to select the channel your
set-top box tunes to whenever it comes out of
standby. You can choose a specic channel or set
your set-top box so that it tunes to the channel it
was tuned to when it went into standby.
Press the MENU button to display the Main menu
(see page 23). Use D to highlight ‘Miscellaneous’
then press OK. The Miscellaneous sub-menu
appears. Highlight ‘Switch-on channel’ then press
OK. The Switch-on channel screen appears.
If you want your set-top box to tune to a specic
channel from standby, use the L R buttons to
select ‘On’. Then press the D button to highlight the
channel number. Use the L button to delete the
existing number and then use the number buttons
to enter the switch-on channel number you want.
If you want your set-top box to tune from standby
to the channel it was tuned to when it went into
standby, use the L R buttons to select ‘O’ for
‘Chosen switch-on channel’. The option to set a
channel number then disappears from the screen.
Saving your changes
When you have made the changes you wish to
make, press OK.
If you do not want to save your changes, press the
EXIT button.
CHANGING THE DISPLAY SETTINGS
You can change the length of time the Zapping
Window appears on your screen and the
transparency of on-screen menus etc.
Press the MENU button to display the Main menu
(see page 23). Use D to highlight ‘Miscellaneous’
then press OK. The Miscellaneous sub-menu
appears. Highlight ‘Display settings’ then press OK.
The Display settings screen appears.
Highlight the Display time setting, then use L R to
select the preferred time, either ‘0 seconds / O’, ‘3’,
‘5’ or ‘10’ seconds.
NOTE: If you make the setting “0 seconds / O”,
the Zapping Window will not appear when you
change channel. It will however appear when
you press the i button. In this case, you must
press the EXIT button to remove the Zapping
Window from the screen.
Use D to highlight the Transparency setting, then
use L R to select the preferred amount (None,
10%, 20%, 30%, 40%, 50% or 60%).
When you have made the changes you wish to
make, press OK.
If you do not want to save your changes, press the
EXIT button.
USING THE OTHER MENUS