System information

ELECTRICAL INFORMATION (UK AND EIRE ONLY)
Mains plug and its fuse
The supplied mains plug is a non-rewireable type.
If you need to replace the fuse, you must use an
ASTA- or BSI-approved BS 1362 fuse, rated at 3 A and
marked as shown below.
or
The plug has its fuse beneath a fuse cover on its
face. Use a screwdriver to lever o the fuse cover,
replace the fuse with a new one and ret its cover.
Never use a plug if its fuse cover is missing.
AM
The fuse is inside the rewireable plug. Use a
screwdriver to remove the plug’s back cover. Never
put the plug into the mains socket when its cover is
removed. Lever out the fuse and replace it with a
new one. Replace the plug’s back cover.
3 AMP
L
N
E
FUSE of correct value
WARNING
If the supplied mains plug is not suitable for
your mains socket-outlet, DO NOT plug it in.
Remove its fuse and then cut the plug o the
lead. Destroy the severed plug immediately
to avoid the shock hazard which would exist if
this were to be plugged into a mains socket.
Fit an appropriate mains plug on the lead.
If this plug contains a fuse, it should be as
described left. If you are using a non-fused
plug, an external fuse must not exceed 5 A.