System information
13
NETWORK SCAN
The Network scan screen appears, with the type of
scan highlighted in yellow. If you need to go back to
the previous screen, press EXIT.
Press the L R buttons until the type of scan
you want (Fast scan, NIT scan, Exhaustive or
Frequency) is displayed.
If you have a dish positioner, you can select the
satellite you want. Use the U D buttons to
highlight the Satellite setting, then press the L R
buttons until the one you want to scan is displayed.
To change any of the Frequencies or Symbol
rates, rst use the U D buttons to highlight the
one you want to edit. Then use the L R buttons to
underline each digit, and the number buttons to
enter digits.
To change a highlighted Polarisation, use the
L R buttons until the polarisation you want is
displayed.
To start the scan, using the values you have entered,
press the OK button.
When the scan is complete, the Network scan
screen appears again. You can now choose
new values and scan again to nd more
channels, for example from a dierent satellite.
Alternatively, press MENU to quit scanning for
channels and begin using your set-top box.
GETTING STARTED