System information

RECEPTION SCREEN

On this screen you must select the method

you have used to connect your set-top box to

your satellite dish(es), and select the associated

satellite(s).

First, use the L R buttons to display the

connection method you have used:

• Single LNB

• Bi-head Tone Burst

• Bi-head DiSEqC

• Tone Burst 2 Inputs

• 2-input DiSEqC switch

• 4-input DiSEqC switch

• DiSEqC motor

Then, use the U D buttons to highlight the

satellite(s) you want to change. Use the L R

buttons to display the satellite name you want.

NOTE: If you have a DiSEqC motor system, you

must also choose your location (for example,

country and city). You can also press the red

button to search for a satellite.

GETTING STARTED

IMPORTANT: If you are uncertain about any

of the settings you wish to make, consult a

competent installer of satellite dishes.

Press the OK button to save your settings.

The Reception quality screen appears.

This screen indicates whether or not your

installation is correct, and the signal quality being

received by the tuner. If you need to go back to the

previous screen to change the settings, press EXIT.

Or, press OK to continue.