System information

8
LNB AND MAINS CONNECTIONS
• Connect the LNB lead from your satellite dish to
the connector marked SATELLITE IN on your
set-top box.
• Plug the 2-way connector on the supplied
mains lead into the mains socket (marked 230V
50Hz) on your set-top box.
• When all the connections are properly made,
connect all the equipment to the mains supply.
COMPONENT
VIDEO-OUT
USB
+5V DC
500mA Max.
OPTICAL
AUDIO OUT
SATELLITE OUT SATELLITE IN
TV SCART
VCR SCART
TELEPHONE
LINE
230V 50Hz
Pr
Pb
Y
R
L
AUDIO
13/18V DC
400mA max.
Optical digital audio lead
Hi- amplier
Home cinema system
HDTV
Stereo phono leads
CONNECTING UP
AUDIO CONNECTIONS
To make the most of your set-top box and digital
television, you may also wish to connect your set-
top box to audio equipment, such as a hi- amplier
or home cinema system.
If you have connected an HDTV using method B or
C on page 6, you must also make at least one of the
audio connections described below.
• For best results, connect an optical digital audio
lead (not supplied) between the connector
marked OPTICAL AUDIO OUT on your set-top
box and the corresponding connector on your
home cinema system.
• Or, connect stereo phono leads (not supplied)
between the AUDIO L + R sockets on your
set-top box and the corresponding audio-in
sockets on your HDTV or hi- amplier.
NOTE: If you are using an HDTV and then make
additional audio connections, you may have
to adjust the “Lip Sync” setting of your set-top
box. See page 27 for details.