Datasheet

- a 220-240 volt AC/DC mains adapter.
- a cigar lighter adaptor
ADVICE FOR USE
1- Connecting the charger to the electricity supply
On 220-240 volt alternating current:
• Connect the charger to the mains adapter by plugging the adapter to the
charger socket marked ‘Input 12-18V DC’.
• Plug the mains adapter into an electric socket. The green light on the charger
lights up to show that the charger is correctly connected.
On 12 volt cigar lighter adapter:
• Connect the charger to the cigar lighter adapter by plugging the adapter to
the charger socket marked ‘Input 12-18V DC’.
•Plug the adapter into the cigar lighter of your vehicle (caution, this charger
works only on 12-volt connectors : passenger cars)
2- Placing the battery on the charger:
For 6 volt battery Ni-Cd or Ni-MH
• You do not require an adaptor plate. The battery will slide directly onto the
charge base unit.
• Attach battery to charger. Observe correct contact position by matching those
of your battery with those shown on the charger
FOR SONY, PANASONIC, JVC, HITACHI, AND SHARP
• Start with battery slightly to the left of the contacts on the charge base unit,
push the battery down and slide to the right until secure.
FOR CANON
• Align the battery to the right of its contacts and slide it to the left. When the
battery is correctly positioned, you should hear a ‘click’.