Manualshelf

Install Manual

ManualsBrandsUniRac ManualsSolar & Wind PowerSM Endclamps, Clear Anodized, Integrated Bonding, Size C For Frames 33MM To 36MM (Priced Per Pack Of 20)
891011121314151617
SM
SOLAR
MOUNT
INSTALLATION GUIDE
PAGE
ROTATE MIDCLAMP T-BOLT: Rotate bolt into position
and slide until bolt and clamp are against module
frame. Do not tighten nut until next module is in
position. Verify that the position indicator & T-bolt
shaft are angled in the correct position.
INSERT MIDCLAMP T-BOLT: Apply Anti-Seize and
insert 1/4” T-bolt into rail.
INSTALL MIDCLAMPS: Midclamp is supplied as an
assembly with a T-bolt for module installation.
Clamp assemblies may be positioned in rail near
point of use prior to module placement.
BONDING MIDCLAMP
K
POSITION INDICATOR - SERRATED T-BOLT: Verify the
T-bolt position indicator is perpendicular to the rail.