Install Manual

SOLARHOOKS
PAGE
5
PRO SERIES INSTALLATION GUIDE
SPANISH
Locate and mark rafters. Position hook. Use 3/16” bit to
drill 2 pilot holes.
Remove hook, clean debris and
fill pilot holes with roofing
sealant
Remove tiles around installation
area.
Reposition hook, secure with
included lag screws.
Replace tiles, if necessary notch
with grinder to ensure proper fit.
1. 2. 3. 4.
5. 6.
NOTE: SOLARHOOK SPANISH CT1
and CT2 are compatible with W and
S tile profiles.
Installation process is the same for
both tile profiles and hook models.
Install components as shown above.