Install Manual

SOLARHOOKS
PAGE
4
PRO SERIES INSTALLATION GUIDE
FLAT
Locate and mark rafters. Position hook. Use 3/16” bit to
drill 2 pilot holes.
Remove hook, clean debris, then
fill pilot holes and rib on back of
hook with roofing sealant.
Remove tiles around installation
area.
Reposition hook, secure with
included lag screws.
Replace tiles, if necessary notch
with grinder to ensure proper fit.
RECOMMENDED TOOLS
Drill, Impact Driver
3/16” drill bit
Sealant
Marking crayon/ chalk
Rafter locator
1. 2. 3. 4.
5. 6.
Install components as shown above.