Install Manual

FLASHLOC is the ultimate attachment for composition shingle and rolled comp roofs. The all-in-one mount installs
fast — no kneeling on hot roofs to install flashing, no prying or cutting shingles, no pulling nails. Simply drive the
lag bolt and inject sealant into the base. FLASHLOC’s patented TRIPLE SEAL technology preserves the roof and
protects the penetration with a permanent pressure seal. Kitted with lag bolts, sealant, and hardware for maximum
convenience. Don’t just divert water, LOC it out!
PROTECT THE ROOF
Install a high-strength waterproof attachment
without lifting, prying or damaging shingles.
FLASH LOC
LOC OUT WATER
With an outer shield
1
contour-conforming gasket
2
and pressurized sealant chamber
3
the Triple Seal
technology delivers a 100% waterproof connection.
Cut Away View
HIGH-SPEED INSTALL
Simply drive lag bolt and inject sealant into the port
4
to create a permanent pressure seal.
Cut Away View
FASTER INSTALLATION. 25-YEAR WARRANTY.
FOR QUESTIONS OR CUSTOMER SERVICE VISIT UNIRAC.COM OR CALL [phone]
3
2
4
1
TESTED TO TAS-100
WIND DRIVEN RAIN TEST
AND UL441 RAIN TEST