Installation Guide

6
To reduce the risk of re, electrical shock, personal injury or damage when
using the appliance, follow the important safety instructions listed below:
ELECTICAL SHOCK HAZARD
Before removing a faulty oven light bulb, make sure you turn
the power to the range off at the main fuse or circuit breaker
panel. If you don’t know how to do this, contact an electrician.
Do not remove the kick strip grate. Due to access to live
electrical parts behind it, the kick strip grate should only be removed by a
qualied technician.
This appliance is equipped with a three-prong grounding plug for your
protection against shock hazard and should be plugged directly into a
properly grounded power outlet. Do not under any circumstances cut or
remove the grounding prong from this plug. Failure to follow this advice may
result in death or electrical shock.
TIPPING HAZARD
All ranges can tip and cause injuries. Install the anti-tip device
supplied with your range. Follow all installation instructions.
TO INSTALL THE ANTI-TIP DEVICE:
• Slide range forward.
• Install the anti-tip device as described in the instruction.
• Safely tilt the front section of the range and slide the range slowly back
against the wall. The rear pins should slide under the bracket.
• Do not use the appliance until it has been secured.
FAILURE TO FOLLOW THIS ADVICE MAY RESULT IN
SERIOUS INJURY OR DEATH.
IMPORTANT SAFETY INSTRUCTIONS continued