Installation Guide

CARE AND CLEANING continued

To avoid electrical shock or burns, turn off controls and ensure the

range and oven are cool before cleaning.

Replacing the burner parts:

When replacing the burners, make sure that the two locating pins on the

bottom of the brass ame spreader are properly aligned with the locating pin

holes on the top of the simmer ring.

Incorrect alignment will produce a potentially dangerous ame and poor

burner performance.

Replacing the oven light bulbs:

To replace either of the oven light bulbs, release the glass cover on the lamp

holder, and then replace the old bulb with a new bulb.

Burner cap

Ignitor

Thermocouple

Inner burner base

Outer burner head

Outer burner base

Burner base cup

Outer burner base