Warranty

UNIQUE UGP 3
8
4. To terminate any power mode, gas, AC or DC, turn the knob (A) to either of
two OFF positions
Battery replacement for electronic spark ignition
When the battery ignition fails to spark, you need to replace the battery, replacement step
as follows
1. Hold and pull down the “A” as illustrated in pic, take out the battery box.
2. Replace the old AAA battery “B” with new one. Note: 7#1.5V battery need to be used
and the red wire must connect to the “+” side of the battery.
CONTROLS – See Fig. #1 for description of controls
Figure #1
Thermostat
The refrigerator cooling temperature is controlled by a combination thermostat that can
be adjusted by turning knob E to different settings to maintain the desired refrigerator
temperature when operating on either gas or 110V. Knob D also incorporates a safety
device which automatically shuts off the supply of gas if the flame goes out. The
electronic igniter discharges sparks onto the burner when the button is pushed.