Installation Guide

33
Troubleshooting Guide
Problem Cause Correction
1. Surface burner fails to light a. Clogged burner ports
b. Battery dead
c. Ignition relay defective
a. Remove burners and clean
out dirt and spider webs
b. Replace with new D size
battery.
c. Replace relay
2. Uneven flame a. Clogged burner ports
b. Uneven burner alignment
a. Remove burners and clean
out dirt and spider webs
b. Check black caps are placed
evenly onto burners
3. Oven does not light a. Oven pilot is out
b. Moisture buildup in ceramic
sleeve of oven electrode
a. Relight oven pilot
b. Heat up ceramic sleeve with
BBQ lighter to remove
moisture
4. Oven Temperature seems to
be inaccurate
Food takes too long to cook
Food cooks too fast
Overbrowning
a. Oven wasn’t preheated
b. Incorrect use of aluminum
foil
c. Oven bottom incorrectly in
place
d. Oven calibration of burner
out of adjustment
a. Preheat oven for 10 minutes
b. Refer to section on aluminum
foil
c. Replace oven bottom
correctly
d. Have technician calibrate
oven and adjust burner
UNIQ UE U GP24G