Service manual

12. To remove Rear heater assembly parts.

1) Remove a screw and pull out Cover motor *B .

2) Remove a screw

and pull out Cover *B .

3) Pull out the Harness convection-B

4) Remove four screws

and then pull out the Rear heater assembly.

5) Remove a Nut

and the pull out the Fan convection and Washer plain .

6) Remove a screw

and then separate the Cover heater *B and the lnsulator heater *B .

7) Pull out two Heater miraclon

from the Cover Heater *B .

8) Remove two screw

and then separate the lnsulator heater *B and Motor shaded pole .

9) Remove the C-Ring

and then pull out the Fan from Motor shaft.

10) Reverse the above steps for reassembly.

REF NO. PART CODE PART NAME DESCRIPTION Q’TY REMARK

1 7112401011 SCREW TAPPING T1 TRS 4*10 MFZN 2

2 3511407300 COVER MOTOR *B SA1D-80 T0.5 1

3 7112401011 SCREW TAPPING T1 TRS 4*10 MFZN 2

4 3511407400 COVER *B SA1D-80 T0.5 1

5 3512766900 HARNESS CONVEC *B KOC-1B0K0S 1

6 3512803820 HEATER MIRACLON 60V 550W 2

7 3511407700 COVER HEATER *B SA1D-80 T0.5 1

8 7113400814 SCREW TAPPING T1 BIN 4X8 MFNI 1

9 7400104011 WASHER PLAIN PW-1-4 MFZN 1

10 3511800700 FAN CONVECTION SA1D-80 T0.5 1

11 7S627W40X1 SPECIAL SCREW NUT FLANGE M4 MFZN 1

12 3512766800 HARNESS CONVEC *A KOC-1B0K0S 1

13 7601400811 SCREW MACHINE PAN 4X8 PW MFZN 2

14 3513302900 INSULATOR HEATER *B SBHG-1 T0.5 1

15 7113400814 SCREW TAPPING T1 BIN 4X8 MFNI 4

16 3963822630 MOTOR SHADED POLE 120V 60HZ MW10XA 1

17 3511800900 FAN PBT 1

18 7402704600 RING C CR-5 SK5 1