Service manual

5. To remove control panel parts.

- KUC-1B0K

REF NO. PART CODE PART NAME DESCRIPTION Q’TY REMARK

B01 3511605000 DECORATOR C-PANEL ABS XR-401 H-2938 1

B02 3511605100 DECORATOR RING ABS SG-175 SG-0760D 1

B03 3515501700 WINDOW DISPLAY PMMA 1

B04 3516724100 CONTROL PANEL ABS XR-401 H-2938 1

B05 3516908300 BUTTON FUNCTION-A ABS SG-175 SG-0760D 1

B06 3516908500 BUTTON FUNCTION-C ABS SG-175 SG-0760D 1

B07 3516908400 BUTTON FUNCTION-B ABS SG-175 SG-0760D 1

B08 7122401211 SCREW TAPPING T2S TRS 4X12 MFZN 3

B09 PKMPMSAF10 PCB AS KOC-1B0K9A27 1

B10 7121301011 SCREW TAPPING TS2 PAN 3X10 MFZN 7

B11 3516908600 BUTTON FUNCTION-D ABS SG-175 SG-0760D 1

B12 3516908700 BUTTON FUNCTION-E ABS SG-175 SG-0760D 1

B13 3516908200 BUTTON START ABS SG-175 SG-0760D 1

B14 3513406000 KNOB VOLUME ABS SG-175 SG-0760D 1

(1) Remove the screw which secure the control panel, push up two snap fits and draw forward the control panel assembly.

(2) Remove three screws (B08) which secure the control panel.

(3) Pull out the Main pcb assembly(B09).

(4) Remove seven screws(B10) which secure the control panel.

(5) Pull out the Knob volume(B14) from the Sub pcb assembly.

(6) Pull out six buttons from the control panel.

(7) Pull out Decorator ring(B02) and Window display(B03) from the control panel .

(8) Pull out the Decorator c-panel(B01) from the control panel.

(9) Reverse the above steps for reassembly.