Use And Care Manual

The default left side orientation of the door can be changed to the

right side. Use the following procedure to change the side of the

door hinge.

Tools required: Slot screwdriver, Cross screwdriver, Spanner

1. Set the thermostat to the 0 position and disconnect the power

plug from the electrical outlet.

2. Remove the shelves, crisper and egg tray from the unit.

3. Tilt the appliance backwards to an angle of 45° and securely sup

port it.

4. Unscrew the adjustable feet (A-10) on the bottom.

5. Unscrew the low adjustable foot (A-11).

6. Unscrew ange screws (A-12) and lower hinge parts (A-13) with a

at head screw driver then reverse the lower hinge parts and x to

other side (B-13 to 16)

7. Remove the fridge door (A-8)

PARTS LIST

1: Shelf

2: Freezer compartment

3: Bulb with cover

4: Thermostat 0 - 7

5: Door

6: Upper hinge

7: Lower hinge

8: Adjustable feet

9: Crisper

10: Detachable door rack

11: Middle hinge

12: Egg Tray

13: Power Cable

14: AC/DC Plug (optional

for on-grid use)

DOOR REMOVAL AND REVERSAL

AC/DC plug

(optional for on-grid use)

*sold separately