Use And Care Manual

7. Remove the door (A-5)

8. Unscrew the stop block model on the right bottom of door (A-11)

and  x the stop block model to the left bottom of door (C-11)

9. Unscrew the hinge plastic cap  ange screws from upper hinge (A-

1, 2, 3) and screw it to the other side of the fridge (C-1, 2, 3)

10. Cover the top hinge holes with screw caps (A-4)

11. Check now if all the hinges and shafts are moved to same side

12. Attach the fridge door to the upper hinge (C-5)

13. Attach the lower hinge (C-10) to the fridge door and screw (C-6)

them together

14. Attach the adjustable feet on the bottom (C-7)

18. Put glass shelves, crisper and egg tray to their original position.

19. Make sure that the door is in the vertical position and can be

closed easily.

PARTS LIST

1 Plastic cap

2. Flange screw

3. Top hinge parts

4. Screw cap

5. Fridge door

6. Flange screw

7. Adjustable foot

8. Low adjustable foot

9. Lower hinge parts

10. Lower hinge parts

11. Stop block model of

fridge door

IMPORTANT: After reversing the door hinge, the door gasket may

be loose. Should you notice a gap between the gasket and the

cabinet, use a hairdryer or heat gun and heat the gasket while on

the appliance. The gasket will expand to meet the cabinet. Allow 30

mins to cool before opening. A correct gasket positioning is the key

to prevent refrigerated air from escaping.

DOOR REMOVAL AND REVERSAL continued