User's Manual

Chapter 3 Installation
3.7.3 High Band Exciter (HBE)
The
control cabinet includes a retractable shelf with mounting brackets for the HBE. Please
refer to Figure 3-9
, Figure 3-10 or drawing SX03-33000-01-D01 for the mounting position of
the HBE.
The HBE should be should be installed in the following sequence:
1. Place the HBE on the shelf located above the BMS.
2. Secure the HBE to the shelf by installing two (2) 12-24x3/4” socket head cap screws
and #12 flat washers (1 located on either side of the HBE) – see Figure 3-20
.
Figure 3-19 HBE Shelf
PICTURE TBD
Figure 3-20 HBE Shelf with HBE
PICTURE TBD
1) HBE Mounting Bracket
2) Mounting Screw Hole
3) HBE
4) 12-24x3/4” Socket Head Cap Screw and “12 Flat Washer
SX03-30000-01-M01
3-23