User's Manual

Chapter 3 Installation
14. Once all of the 1/4-20x1-1/8” socket head cap screw are lined up, proceed to tighten
them fully, starting with the WR340 flange connections. A torque rating of 45 Inch
Lbs. must be used to tighten the screws.
15. Position the control cabinet according to site drawings and the DRU-2KW mechanical
drawings SX03-30000-02-D01 or SX03-30000-03-D01.
Figure 3-6 OFN Cabinet Foot
1) Top Nut
2) Bottom Nut
SX03-30000-01-M01
3-14