User's Manual

Chapter 3 Installation

3.6 Repeater Setup

he DRU-2KW repeater may only be installed indoors (typically on the top floor of a building

nearest to roof, or in a shelter at the base of a transmission tower) in a restricted access

location.

3.6.1 Moving the Repeater Cabinets

For sh

ipp

ing purposes, the repeater cabinets are attached to pallets. Some options for

moving the repeater cabinets are:

 Using a pallet tuck

 Using a four wheeled furniture dolly

 Placing casters under the pallet

If the repeater cabinets are moved from the delivery location to the installation location

while still attached to their pallets, a pallet truck or casters are viable options. However, if

the repeater cabinets must be removed from their pallets, a narrower furniture dolly is a

viable option for moving the repeater cabinets.

3.6.2 Removing HPA Cabinet Parts

If, for some

reason, th

e HPA cabinet is unable to fit through a door/opening, the following

exterior parts can be removed from the cabinet:

 Fan/blower

 Top hood

 Front panel

NOTE: Please refer Section 3.6.3 of the manual for unpacking instructions and Section 6 of

the manual for detailed instructions on removing parts.

SX03-30000-01-M01

3-7