User's Manual

Chapter 3 Installation
3.7.4 Low Band Exciter (LBE)
The control
cabinet includes a retractable shelf with mounting brackets for the LBE. Please
refer to Figure 3-9
, Figure 3-10 or drawings SX03-33000-01-D01 for the mounting position of
the LBE.
The LBE should be installed in the following sequence:
1. Place the LBE on the shelf located above the HBE.
2. Secure the LBE to the shelf by installing four (4) 12-24x3/4” socket head cap screws
and #12 flat washers (2 located on either side of the LBE) – see Figure 3-22
.
Figure 3-21 LBE Shelf
PICTURE TBD
Figure 3-22 LBE Shelf with LBE
PICTURE TBD
1) LBE Mounting Bracket
2) Mounting Screw Hole
3) LBE
4) 12-24x3/4” Socket Head Cap Screw and “12 Flat Washer
SX03-30000-01-M01
3-24