User's Manual

Page 58
X75 SERIES - Mk3 Controller
INSTALLATION & OPERATING MANUAL
Manual No. x75mk3-11
x75-man-Rev11-0815.indd
Parameter Name Function
externalUTAOn Temperature at which External Under Temperature
Alarm activates.
externalUTAOff Temperature at which External Under Temperature
Alarm clears.
controllerOTAOn Temperature at which Controller Over Temperature
Alarm activates.
controllerOTAOff Temperature at which Controller Over Temperature
Alarm clears.
controllerUTAOn Temperature at which Controller Under Temperature
Alarm activates.
controllerUTAOff Temperature at which Controller Under Temperature
Alarm clears.
overVoltageOn Voltage at which Over Voltage Alarm activates.
overVoltageOff Voltage at which Over Voltage Alarm clears.
lowVoltageOn Voltage at which Low Voltage Alarm activates.
lowVoltageOff Voltage at which Low Voltage Alarm clears.
lowLowVoltageOn Voltage at which Low Low Voltage Alarm activates.
lowLowVoltageOff Voltage at which Low Low Voltage Alarm clears.
rectOverCurrentOn Current at which Rectifier Over Current Alarm
activates.
rectOverCurrentOff Current at which Rectier Over Current Alarm clears.
loadOverCurrentOn Current at which Load Over Current Alarm activates.
loadOverCurrentOff Current at which Load Over Current Alarm clears.
battOverCurrentOn Current at which Battery Over Current Alarm activates.
battOverCurrentOff Current at which Battery Over Current Alarm clears.
battOnDischargeOn Current at which Battery On Discharge Alarm
activates.
battOnDischargeOff Current at which Battery On Discharge Alarm clears.
anxHighOn
(x = 1 to 4)
Level at which ANx High Alarm activates.
[not used in X75]
anxHighOff
(x = 1 to 4)
Level at which ANx High Alarm clears.
[not used in X75]
anxLowOn
(x = 1 to 4)
Level at which ANx Low Alarm activates.
[not used in X75]
anxLowOff
(x = 1 to 4)
Level at which ANx Low Alarm clears.
[not used in X75]
minimumRectiers Activated if number of rectiers detected is less than
this value.