User's Manual Part 1

Chapter 3 Installation
3.9.5 Dial-up Modem
During the installation procedure, a number of wires/cables must be connected to the dial-up
modem (where applicable). Please refer to Table 3-9
or drawing SX03-10900-03-D06.
Note: The phone line cord between the Telco surge protector and the dial-up modem is not
pre-wired in the DRU. The cable should be connected prior to installing the dial-up modem.
Please see Section 3.11.1
for details.
Table 3-9 Dial-up Modem Connections
Port Name Type Cable Number
N/A LINE RJ-11 N/A
N/A RS-232 DB-9 N/A
N/A N/A
(DC Input)
2.5 mm Locking DC Power Jack SX03-10927-01
SX03-10000-01-M01 3-35