User's Manual Part 1

Chapter 3 Installation
Figure 3-25 Electronics Compartment Components (with connections)
3.9.1 Ground and AC Connections
All repeater cabinet internal ground wires are pre-wired to the cabinet ground bar. During
the installation procedure, several components must be connected to the ground bar via the
pre-wired ground wires. Please see the subsequent sections of this manual.
All repeater cabinet internal AC components are pre-wired to the cabinet PDU. Only the
cabinet PDU needs to be connected to building/site electrical service panel (or AC disconnect
device).
SX03-10000-01-M01 3-30