Manualshelf

User's Manual Part 1

ManualsBrandsUnique Broadband Systems ManualsElectronics200W Satellite Dual Repeater Unit
41424344454647484950
Chapter 3 Installation
SX03-10000-01-M01 3-13
3.7.2 High Band Exciter (HBE)
he electronics compartment includes a custom mounting bracket for the HBE. Please refer
T
to Figure 3-3
, Figure 3-4 or drawing SX03-10000-03-D01 for the mounting position of the
HBE.
The HBE should be should be installed in the following sequence:
1. Place the HBE on the custom mounting bracket located above the BMS.
ur (4) knurled
2. Secure the HBE to the custom mounting bracket by tightening the fo
screws (2 located on either side of the HBE; 1 near the front of the HBE and 1 near the
back of the HBE) – see Figure 3-9
.
Figure 3-8 HBE Mounting Bracket
igure 3-9 HBE Mounting Bracket with HBE
F
1) HBE Mounting Bracket
2) Knurled Screw
3) HBE