User's Manual

Page 52
X75 SERIES
INSTALLATION & OPERATING MANUAL
Manual No. x75-10b
x75-man-Rev10b-0514.indd
This document is believed to be correct at time of publication and UNIPOWER LLC accepts no responsibility for
consequences from printing errors or inaccuracies. Specications are subject to change without notice.
Appendix 3 – Revision History
Rev.
#
Date Detail Page
1 11/06 First Release
2 12/06 Correction to Input Supply Current specication.
Section 6.4 – Wording altered for clarication.
Section 11.4 – Wording altered for clarication, table corrected.
Section 12.4 – Wording altered for clarication.
Figure 8 – Screen grab changed to reect standard X75 setup.
8
9
18
21
36
3 05/07 Figure 3a – J2 & J4 designation corrected.
Figure 16 – Screen grab changed to correct rectier thermal & fan alarm setups.
URL to MIB les changed.
11
36
50
4 07/07 Figure 3a – Bus Bar designations corrected.
Section 9.4 – Wording altered to clarify connection arrangements.
Section 12.6 – Wording altered to clarify start-up sequence.
Section 13 – Note added relating to content of screen images and ‘typical’
added to titles for all screenshot Figures.
11
13
22
27-46
5 08/12 Update screenshots.
Add DC Walk-in.
Update WEB address.
27-46
35
50
5a 05/13 SNMP now standard. various
5b 07/13 Default passcodes added. 31
6 07/13 Added rectier input current table. 20
7 10/13 Full revision including new section on principal of operation. all
7a 11/13 Correct wire sizes sections 11.1.2, 11.2, 11.4 . 16-18
8 01/14 Add safety warnings for UL in section 3.
Amend section 7.2 to clarify shunt function.
Update Figure 15 screenshot for f/w rev 4.03.
Update section 13.4 to include description of temperature shutdown feature.
Add new appendix 2 for special reference 578.
Renumber this appendix.
6
10
32,
34,35
51
52
9 01/14 Add notes about Java security issues 23-25
10 05/14 Correct operating temperture specications 9
10a 05/14 Change title for appendix 2 51
10b 05/14 Amend clause 3.3.1 6