Instructions / Assembly

TABLE TOP BUCKET FOUNTAIN
MODEL: M04583
The table top bucket fountain (Model M04583) is the newest addition to Unique Arts family of indoor Water
garden products. These fountains have been designed to run in fresh clean water and used indoors only, with a US
standard listed pump. (UL listed )
INSTALLATION
Please be sure to read and save these instructions for future reference:
To operate your fountain, please follow these simple instructions:
PLACE THE FOUNTAIN IN AN AREA THAT CAN WITHSTAND THE MOISTURE AND THE SLIGHT
SPLASH IT PRODUCES
a. Add plants of your choice (live plants in 4” pots or silk plants are not included with the fountain) into
the cavity for planters. FIG-1. Or for those with green thumbs, the cavity can be used for hydro
culture, (water plants). Please consult a nursery or home center for specific hydro plants and care of
plants.
FIG-1
b. ADD WATER. ( Watering can is not included with the fountain Fill the fountain with fresh water
just to the top until you can see water on the surface. DO NOT fill the cavity for the planters, just fill
the reservoir. FIG-2
FIG-2
DO NOT RUN THE PUMP DRY
c. PLUG IN to start the pump and the water will start flowing from the top copper cup. After the pump
starts working, IT IS IMPORTANT THAT water does not splash outside the planter. If you notice
any splash, you may have put too much water in the dish, or you may need an adjustment on the water
flow of the pump. IF you need an adjustment to the water flow, it should be done at this time. First
disconnect the pump from electrical outlet and lift the plastic insert. After you lift this unit, you will
see the pump underneath. Adjust the water flow by using the flow control lever on the pump. Moving
the lever toward the plus (+) sign will speed up the flow of water, and towards (-) sign will reduce it.
d. Check water level regularly and add water as needed. You should see the water on the surface at all
times. LOW WATER WILL BURN THE PUMP OUT AND VOID THE WARRANTY.
The copper parts of this fountain will develop a green Verdi patina naturally with time. IF you wish to maintain a
polished finish for the fountain and planter, spray the copper with a gloss clear Polyurethane coating that you can
find at any home center or hardware store. Apply several coats for a long lasting finish.
Please contact our Product Specialists for assembly questions or assistance at 1-800-928-3738
or e-mail [e-mail]. Specialists are available weekday 8:00AM to 5:00PM CST
Made in Turkey